Short answer: replace shattered glass, stabilize minor cracks
A shattered or missing piece needs to be replaced with matching glass. A minor crack that has not shifted can often be stabilized instead. Before you start, assess the damage, because the right repair depends on what broke and how the panel was built.
Assess the damage first
Check these points before you touch the panel:
- Is it a crack or missing glass? A crack that has not moved can often be stabilized. Missing or shattered glass needs replacing.
- Is it copper foil or lead came? The removal steps are different for each method. See copper foil vs lead came if you are not sure.
- Is the panel old or valuable? Antique or valuable panels should be handled by a professional restorer. For what affects value, see how much real stained glass is worth.
- Are other pieces cracked? Look over the whole panel. Repairing one piece can put stress on the others.
Work safely
Wear safety glasses and gloves. Broken glass can shift and fly when you tap or pry it. Support the panel so it does not bend, and keep the rest of the glass from sliding or dropping. Clean up every shard, even the tiny ones, with a vacuum and damp cloth.
Stabilize a minor crack
For a hairline crack that has not shifted, you can strengthen the piece without replacing the glass:
- Clear adhesive. Wipe a clear epoxy, UV-curing resin, or glass glue into the crack. Wipe off the excess, and cure it according to the label. The line may still be visible.
- Copper foil overlay. On copper foil work, place a strip of foil across the crack and solder it so it blends with the nearby lines. Instructables has a walkthrough of this method.
These fixes add reinforcement, but they do not always last as long as a full repair.
Remove a broken piece: copper foil
- Warm the solder joints around the broken piece with the iron. Work slowly so the heat spreads and does not crack the neighboring glass.
- Lift the old solder away with the iron tip and a little flux.
- Peel away the damaged foil once the solder softens.
- Tap out the shattered glass gently, starting from the middle of the broken area. Work the pieces out slowly so you do not damage the surrounding glass.
Remove a broken piece: lead came
- Cut or lift the lead flanges carefully around the broken piece with a sharp tool. Work slowly so you do not bend the came out of shape.
- Remove the broken glass in small pieces.
- Straighten or replace the came if it is bent or damaged. New came may be needed if the old came is too stretched or distorted to hold the new glass.
Lead came contains lead. Wash your hands after working with it, and do not let children handle the old came.
Cut the replacement
- Trace the opening onto paper, or use the original pattern if you have one.
- Choose matching glass. Match the color, texture, and thickness as closely as you can. The guide to types of stained glass can help you identify the original. The thickness should match the came channel or the foil width you plan to use.
- Cut the replacement slightly oversize, then grind it to fit. This is safer than cutting it too small.
- Foil the new piece if the panel is copper foil work.
For the cutting steps, see how to score and cut glass for stained glass. For grinding, see how to grind stained glass edges smooth.
Fit and secure the new piece
- Place the piece in the opening, and check that it sits level and flush with the surrounding glass. Use shims or small coins underneath if you need to raise it.
- For copper foil, tack and bead the new seams to match the existing ones. See how to solder stained glass.
- For lead came, press the flanges back down with a fid, then solder the joints.
- Check the panel for square and flat before the solder cools.
Finish the repair
- Clean off the flux once the solder has cooled. Dry the panel completely.
- Patina the new solder if the rest of the panel is patinated, so the repair matches. See how to patina stained glass.
- Wax the piece after patina has dried.
- Reapply putty or cement around the repaired area if the original panel used it.
When to call a professional
Call a professional restorer when:
- The panel is antique or has high value.
- The window is large or the panel is hard to remove.
- The came is sagging, bowing, or damaged over a large area.
- The repair would mean rebuilding much of the panel.
For what professional work on old windows involves, see stained glass conservation and restoration.
For a broader look at the craft and the options it offers, read the stained glass techniques overview.