Basics

An Introduction to Stained Glass

A beginner's guide to stained glass covering what the craft is, its main types, the basic process, tools, safety and where to start learning.

On this page
  1. What stained glass is
  2. A short history
  3. Main types of stained glass
  4. The basic process
  5. Tools and supplies
  6. Safety basics
  7. How hard is it to learn?
  8. Classes and learning options
  9. Terms you will see
  10. Where to go next

What stained glass is

Stained glass is the craft of cutting pieces of colored glass, arranging them into a design, and joining them so that light can pass through. The pieces are usually held together with thin strips of lead called came, or with copper foil that is soldered. The finished panel is most striking when light shines through it, which is why stained glass is used in windows, lampshades and suncatchers.

The word “stained” is a little misleading. Most makers today do not stain or paint their glass. They buy sheets that already have their color mixed in during manufacturing. Paint and silver stain are used for fine detail on some work, but that is a separate step. For a fuller definition, see what stained glass is.

A short history

Stained glass windows were a major feature of European churches in the Middle Ages. Much of what is known about how they were made comes from a treatise written in the early 12th century by a monk who used the name Theophilus, according to the Victoria and Albert Museum. Many of the steps it describes, such as cutting, painting and leading the glass, still apply.

The copper foil method is widely linked with Louis Comfort Tiffany’s studios in the late 19th century. It allowed finer and more curved designs than lead came alone. Today stained glass is made for churches, homes, public buildings and small decorative pieces.

Main types of stained glass

Glass comes in many forms. The types beginners meet first are:

  • Cathedral glass, a transparent or lightly textured glass that lets light through clearly.
  • Opalescent glass, a milky, semi-opaque glass that softens light.
  • Streaky or wispy glass, which blends two or more colors.
  • Fused glass, pieces melted together in a kiln.

Other types, including dalle de verre and antique glass, are covered in the guide to types of stained glass.

The basic process

A typical project follows a simple sequence:

  1. Design. Draw a full-size pattern and mark the color of each piece.
  2. Cut. Score each piece with a glass cutter, then break it along the line with running or grozing pliers.
  3. Grind. Smooth the edges so the pieces fit together.
  4. Join. Either wrap each edge in copper foil, or fit the pieces into lead came.
  5. Solder and finish. For copper foil, solder the joints on both sides and then clean the piece. Lead panels are usually cemented instead.

How stained glass is made explains the process in more depth, including the steps that happen before the glass reaches the studio.

Tools and supplies

Beginners usually need:

  • a glass cutter, often an oil-filled model
  • running pliers and grozing pliers
  • a glass grinder
  • copper foil or lead came
  • flux and solder (60/40 tin-lead solder is common, and lead-free options exist)
  • a temperature-controlled soldering iron
  • safety glasses and gloves
  • patina and polish, if you want to finish the solder lines

Starting costs are covered in how much it costs to start stained glass.

Safety basics

Stained glass involves sharp edges, glass dust, soldering heat and, in some materials, lead. Simple habits help a lot. Wear eye protection, keep food and drink out of the workspace, wash your hands before eating, clean up with a damp cloth or a HEPA vacuum rather than dry sweeping, and ventilate when you solder. Finished pieces are generally low risk to keep at home, but they should be out of reach of small children and pets. The full picture is in is stained glass safe.

How hard is it to learn?

The basics can be learned in a few sessions. Neat cutting, tight fits and even solder take longer to develop. Straight-line designs and copper foil are a common starting point. Is stained glass hard to learn? describes which parts take the most practice.

Classes and learning options

No formal qualification is needed to make stained glass as a hobby. Many people start with an adult education course, a studio class or a one-day workshop, then continue with books or online tutorials. Stained glass classes, courses and qualifications lists the options and what to check before you sign up.

Terms you will see

Stained glass has its own vocabulary, including came, cartoon, grozing, patina and pot metal. The stained glass glossary explains the common terms in plain language.

Where to go next

Start with the question you have most:

Keep exploring

Guides from other topics

All topics →

Stained Glass Project Ideas

Stained glass project ideas for every skill level, from beginner suncatchers to lampshades and window panels, using copper foil or lead came.

Projects 5 min read