Stained glass sheets are grouped by how they let light through, how their surface looks, and how they are made or worked. Cathedral and opalescent glass are the two most common starting points. Other types, such as streaky, textured, dalle de verre and fused glass, add effects for specific projects.
How types are grouped
- By light and opacity: cathedral (transparent), opalescent (milky), and opaque glass.
- By color blend and texture: streaky, wispy and textured glass.
- By technique: flashed, antique, dalle de verre, fused, painted, etched and carved glass.
Many sheets belong to more than one group. A streaky opalescent sheet, for example, is both opalescent and streaky.
Cathedral glass
Cathedral glass is a transparent, usually single-colored, machine-made glass. It lets light through clearly, and it is widely used for windows. Cathedral sheets are uniform and easy to cut, which makes them a good choice for beginners.
Many manufacturers make cathedral glass with different textures. German new antique glass is a machine-made glass with striations that give it a handmade look.
Opalescent (opal) glass
Opalescent glass is milky and does not let you see through it clearly. It softens light and glows when light shines behind it. Opalescent sheets suit lamps, screens and wall panels, and they are often used for privacy.
Semi-opaque glass is partly see-through and is usually a color mixed with white or another color. Opalescent and cathedral glass can be combined in the same panel for a strong contrast between opacity and transparency.
Streaky and wispy glass
Streaky and wispy sheets blend two or more colors, or mix cathedral and opalescent glass. The result has swirling, cloud-like or streaked effects. These sheets add depth without needing many separate pieces.
Textured glass
Textured glass has surface patterns that bend and scatter light. Common textures include waterglass, hammered, seedy and baroque. Some textures are dramatic, with three-dimensional swirls, and they can dominate a design if used heavily.
Antique (mouth-blown) glass
Antique glass is mouth-blown, so its thickness and color are uneven. This gives it character, with bubbles and waves that catch the light. It is usually more expensive than machine-made glass and varies more from sheet to sheet, so it can be harder to plan a design around it.
Dalle de verre
Dalle de verre uses thick slabs of glass, often around an inch thick, set in epoxy resin or cement instead of lead or foil. The slabs are chipped on their surface to catch light. Dalle de verre is a specialist technique, and the heavy slabs call for a suitable structure and support.
Flashed glass
Flashed glass has a thin layer of colored glass over a clear or differently colored base. Some makers etch away part of the colored layer to reveal the base. Acid etching is hazardous, so beginners should leave it to people trained in the process. Sandblasting also removes the colored layer, but it produces fine dust and needs proper equipment and protection.
Dichroic and iridized glass
Dichroic glass has a thin metallic coating that shows different colors depending on the viewing angle. Iridized glass has a metallic-oxide coating that gives a shimmer. Both can lift a design, but they can also overwhelm it if you use too many.
Fused (kiln-formed) glass
Fused glass is made by melting two or more compatible pieces together in a kiln. Fusing needs glass with matching COE ratings, because mismatched glass can crack during firing or cooling. Fusible sheets can be used in leaded or foiled work too, but fusing needs the right glass and a kiln with a suitable controller.
Painted, etched and carved glass
Painted glass has fine lines and shading added with glass paint, which is fired so it fuses to the surface. Etched glass has its surface changed with acid or sandblasting. Carved glass is cut or ground with a wheel to create lines and lettering. Each technique adds detail to the glass and does not replace it.
Choosing a type for a project
- For a bright window: choose cathedral or German new antique glass, which lets light through.
- For privacy: choose opalescent or semi-opaque glass, which softens or blocks the view.
- For a first project: use cathedral glass, which is uniform and easy to cut.
- For fusing: use glass made for fusing and check the COE rating before you combine sheets.
- For a mixed look: combine opalescent and cathedral sheets for contrast.
Glass names and textures differ by manufacturer, so compare sheets in person where you can. Photos rarely show the true color and transparency.
Where to go next
- The stained glass glossary defines terms such as COE, pot metal and flashed glass.
- How is stained glass made? shows where these sheets fit in the process.
- How much it costs to start stained glass covers the materials you will buy along with the glass.