Projects

Stained Glass Project Ideas

Stained glass project ideas for every skill level, from beginner suncatchers to lampshades and window panels, using copper foil or lead came.

On this page
  1. Choose your technique first
  2. Beginner projects
  3. Intermediate projects
  4. Large and commissioned projects
  5. What you will need
  6. What it costs
  7. Safety basics
  8. From pattern to finish
  9. Where to go next

Stained glass project ideas range from a small suncatcher that takes an afternoon to a full window panel that takes weeks. The right first project depends on the technique you want to learn, the tools you have, and how much time you can give. This guide groups common projects by skill level and explains how each one uses copper foil or lead came. Painting on glass with glass paints is a separate craft and is not covered here; see gallery glass painting techniques for that.

Choose your technique first

Most traditional stained glass is built with one of two methods:

  • Copper foil. Each glass edge is wrapped in thin copper tape, then the pieces are soldered together. This is the method popularized by Louis Comfort Tiffany. It handles small pieces and tight curves well, so it is the usual choice for suncatchers, ornaments, boxes, and lampshades.
  • Lead came. Pieces sit in grooved, H-shaped strips of lead, and the joints are soldered. It is traditionally used for larger panels and windows, where the lead forms part of the structure. It takes more tools and more physical effort.

For most first projects, copper foil is the easier choice, especially for small pieces. Lead came suits larger panels where the lead framework is part of the design. Neither method is wrong. They suit different projects. For a side-by-side comparison, see copper foil vs lead came.

Beginner projects

These projects use small pieces, need few tools, and finish quickly. They are a good way to practice cutting, foiling, and soldering.

Suncatchers

A suncatcher is a small, flat panel that hangs in a window so light passes through it. Simple shapes such as hearts, leaves, and diamonds are good first choices. For step-by-step ideas, see easy stained glass suncatcher patterns for beginners.

Christmas ornaments

Ornaments use the same technique at a smaller scale. Stars, bells, and trees work well. The main addition is a hanging loop. Stained glass Christmas ornaments you can make at home covers shapes and loop methods.

Small framed panels

A small panel set into a wooden or metal frame can hang on a wall or stand on a shelf. The frame holds the glass together and gives you a sturdy way to display it, which makes this a good way to try a larger design.

Intermediate projects

Once you can cut and solder a clean seam, you can move on to pieces with more parts, curves, or structure.

Window hangings and cabinet panels

Panels for a window, cabinet door, or transom use the same techniques at a larger size. Measure the opening carefully and allow for the frame. For hanging options, see can stained glass be hung on a wall.

Plant stakes

Small glass shapes mounted on metal rods can sit in plant pots. Use glass and solder that suit outdoor use, and check the joints after winter, since cold and weather can stress them.

Lampshades

Lampshades are built on a form, and the curved pieces must fit the shape exactly, so they are more demanding than flat panels. They also include electrical parts. Use components rated for lighting, and have the wiring checked by a qualified electrician if you are not sure.

Large and commissioned projects

Full windows, doors, and large architectural panels are the most demanding projects. They involve precise measurement, a supporting frame, and often installation by a professional glazier. Many makers build several smaller panels first before taking on this kind of work.

What you will need

The core tools for most projects are:

  • A glass cutter and running pliers
  • Grozing pliers or a grinder to smooth the edges
  • Copper foil or lead came, matched to your glass
  • Flux and solder (lead-free solder is widely available)
  • A soldering iron with a stand
  • Eye protection, cut-resistant gloves, and a flat, clean work surface

For lead came, you also need a way to cut the came and a flat board with clamps to hold the panel square while you solder. For a full list, see stained glass tools and materials.

What it costs

Costs depend on the technique and how much equipment you buy. For most beginners, the soldering iron, glass cutter, and other tools are the main upfront expense, and glass is a smaller part of the budget. Small projects use little glass, which keeps material costs low. Scrap pieces from one project can often be used in the next, which also cuts waste. Exact prices vary by region and supplier, so compare them before you buy. For a breakdown, see how much it costs to start stained glass as a hobby.

Safety basics

  • Wear eye protection when cutting or grinding glass. Chips can fly.
  • Handle freshly cut glass carefully. The edges are sharp, so wear gloves when sorting scraps.
  • Solder in a ventilated area, and keep your face away from the fumes.
  • Wash your hands after soldering and after handling lead came or solder. Do not eat or drink at the bench.
  • Return the soldering iron to its stand when you are not using it. The tip stays hot.

For more on lead and fumes, see is stained glass safe? lead, solder fumes and glass dust.

From pattern to finish

  1. Choose a design and make a full-size pattern. See stained glass design: creating patterns.
  2. Number each piece and cut the glass.
  3. Foil each piece (copper method) or cut the came to size (lead method).
  4. Assemble on the pattern, then flux and solder.
  5. Clean off the flux, add a hanging loop or frame, and check the finish.

Where to go next

Once you have a finished piece, the related guides cover the next steps. To hang a panel on a wall, see can stained glass be hung on a wall. To pack and move one safely, see how to move and transport stained glass windows. To build a portfolio, see how to photograph stained glass art. If you plan to sell, see what stained glass items sell best.

Keep exploring

Guides from other topics

All topics →