Projects

Easy Stained Glass Suncatcher Patterns for Beginners

Easy stained glass suncatcher patterns for beginners, including simple sun, heart, leaf, and geometric designs, with cutting, copper foil, and soldering steps.

On this page
  1. What makes a pattern beginner-friendly
  2. Simple patterns to try
  3. Choose your glass
  4. Tools you need
  5. Step-by-step: copper foil suncatcher
  6. Safety while soldering
  7. Common beginner mistakes
  8. Hanging your suncatcher
  9. Next steps

A suncatcher is one of the best first stained glass projects. It is small, flat, and hangs in a window, so you see the results quickly. A simple design teaches the core skills of cutting, foiling, and soldering without the complexity of a larger panel.

What makes a pattern beginner-friendly

Look for patterns that:

  • use a small number of pieces
  • have mostly straight edges, with only gentle curves
  • avoid very sharp points and tiny slivers, which are hard to cut and foil
  • have a clear outline, so each piece is easy to place

For more design rules, see stained glass design: creating patterns.

Simple patterns to try

These patterns are easy to draw and cut. You can design your own from the ideas below or adapt a simple template.

  1. Geometric diamond. A diamond divided into four triangles or stripes. Every cut is straight, which makes it an ideal first pattern.
  2. Arch with stripes. A rounded arch, similar to a window top, divided into two or three straight horizontal bands. The arch is the only curve, and the stripes are simple to cut.
  3. Heart with a split center. A heart cut in two halves along a straight center line. Two contrasting colors make the design stand out.
  4. Leaf with a vein. A single leaf shape split by a straight center line, with one color on each side to suggest the vein. Keep the tip broad so it is not too sharp to cut.
  5. Sun with straight rays. A small square at the center, with triangular rays radiating out. Straight cuts only, and the rays make a bright focal point.

Choose your glass

Start with smooth sheet glass of medium weight. Heavily textured or thick glass can be harder to cut and foil, so save it for later. Choose two to four colors. A simple color scheme is easier to plan, and it often looks better in a window than a busy mix.

Tools you need

  • A glass cutter and running pliers
  • Grozing pliers or a grinder to smooth the edges
  • Copper foil, with a width suited to the thickness of your glass
  • Flux, solder, and a soldering iron with a stand
  • A burnishing tool, or a smooth, hard object for pressing the foil flat
  • Eye protection, gloves, and a flat work surface

For a fuller list, see stained glass tools and materials.

Step-by-step: copper foil suncatcher

  1. Make a full-size pattern. Draw the design on paper, number each piece, and note the color for each.
  2. Trace and cut the glass. Tape the pattern over the glass, trace each piece, and score along each line with one steady pass of the cutter. Break the glass along the score with running pliers. See how to score and cut glass.
  3. Grind the edges. Smooth each edge so the pieces fit closely. Check each piece against the pattern, and clean off the glass dust. See how to grind stained glass edges smooth.
  4. Foil each piece. Clean the edges, peel the backing from the foil, and center the foil on the edge of the glass. Wrap it evenly around the edge and smooth it down on both faces.
  5. Burnish the foil. Press the foil firmly along the edges so it sticks and lies flat. A loose foil edge can lift later and does not solder well.
  6. Assemble. Place the foiled pieces on the pattern, check the fit, and tack them in place with a small dot of solder.
  7. Flux and solder. Brush flux along the foil, tin the foil with a thin layer of solder, then add a smooth bead of solder over each seam. Solder both sides for a strong piece. See how to solder stained glass.
  8. Clean and finish. Wash off the flux residue with soap and water, dry the piece, and polish it. Add a hanging loop or chain.

Safety while soldering

  • Work in a ventilated area and keep your face away from the fumes.
  • The soldering iron stays hot after you stop. Return it to its stand between seams.
  • Glass edges are sharp. Wear gloves when handling scraps.
  • Wash your hands after soldering, and do not eat or drink at the bench.

Common beginner mistakes

  • Pieces that do not fit closely, which leave gaps that show as dark lines in the finished piece.
  • Foil that is not burnished, so it lifts and takes solder poorly.
  • Too much flux, which makes the piece harder to clean.
  • Solder beads that are too thin, which leave weak joints.
  • Holding the iron on one spot of the glass for too long, which can crack the glass.

Hanging your suncatcher

Attach a hanging loop of wire or chain at the top of the piece, and hang it where light passes through the glass. A window that gets daylight is ideal. Check the loop from time to time, since it takes the weight of the whole piece.

Next steps

Once you have a finished suncatcher, a smaller holiday version uses the same method. See stained glass Christmas ornaments you can make at home. For the full range of project types, see stained glass project ideas.

The complete guide to projects

Stained Glass Project Ideas
Read the guide

Keep exploring

Guides from other topics

All topics →