Stained glass Christmas ornaments are a practical holiday project. They are small, quick to finish, and easy to give as gifts. Most of the skills match a suncatcher, so an ornament makes a good second project once you have finished a small panel.
Ornament shapes that work well
- Tree. A triangle with a short trunk. Straight edges make it easy to cut and foil.
- Star. Points are the tricky part, because each point is a sharp angle that can break. Choose a star with fewer points for your first one, and cut slowly. See how to score and cut glass.
- Bell. A combination of gentle curves and straight lines. Keep the curves shallow.
- Heart. Works well in one or two colors, and it suits a simple split-center design.
- Simplified snowflake. Straight arms with a small center. Keep the arms wide enough to cut cleanly.
Pick a shape that suits your skill level, and keep the number of pieces low.
Choose the right size and glass
An ornament should be small enough to hang lightly, but large enough to cut and foil without fighting tiny pieces. Thin to medium glass keeps the weight down. Two or three colors are enough for most designs.
Materials
- Small pieces of glass in two or three colors
- Copper foil sized for your glass
- Flux and solder
- A soldering iron and stand
- Hanging material: thin wire, a jump ring, or ribbon
- Eye protection and gloves
Step-by-step ornament
- Draw a small pattern, about the size of your palm, and number each piece.
- Cut the glass pieces, grind the edges, and clean them.
- Foil each piece with copper foil, then burnish it so it lies flat and sticks.
- Assemble on the pattern, check the fit, and tack the pieces in place.
- Solder both sides. Tin the foil, then add a smooth bead of solder over each seam, front and back, for a strong joint. See how to solder stained glass.
- Add a hanging loop. Attach a loop of wire or a bail at the top, soldered in place while the joint is still warm.
- Clean and finish. Wash off all the flux, dry the ornament, and tie on a ribbon or hang a chain.
Safety
- Ventilation. Solder fumes are not something to breathe in. Work in a ventilated area.
- Lead-free solder. Many older solders contain lead. Lead-free solder is widely available, and many makers choose it for gifts. Wash your hands after soldering and before you eat. See is stained glass safe? lead, solder fumes and glass dust.
- Hot iron. The tip stays hot after you stop. Return it to its stand between seams.
- Sharp edges. Wear gloves when handling glass scraps, and wear eye protection when you cut or grind.
Gifting and selling
Ornaments are easy to package. Wrap each one in tissue, add a tag, and write the year on it. Keep a few extra for holiday markets. For ideas on which products sell and how to price them, see what stained glass items sell best.
Next steps
For a larger version using the same method, try easy stained glass suncatcher patterns for beginners. For the full range of project types, see stained glass project ideas.