Stained glass is made in two broad stages. First, glass is melted with metal oxides for color and formed into sheets. Then the sheets are designed, cut, assembled with lead came or copper foil, soldered and finished. Most hobbyists buy the sheets and do the second stage themselves.
Step 1: Making colored glass sheets
How color is added
Glass is made by melting silica (sand), an alkali such as soda or potash, and lime. Metal oxides are added to the molten mix to color it. Common examples include:
- Cobalt for blue
- Copper for green and turquoise
- Gold for ruby red
- Manganese for purple
- Iron for green and amber tones
Because the color is added to the molten glass, it runs through the sheet. This is called pot metal. Other effects, such as silver stain, are added to the surface after the glass is made. See what stained glass is for more on these techniques.
How sheets were made
Medieval glassmakers used two main methods. In the cylinder or muff method, a bubble of glass was blown into a cylinder, cut open along its length, reheated and pressed flat. In the crown method, the bubble was spun on a rod until it flattened into a disk, which was thicker at the center. Modern factories produce flat sheets with industrial methods. In the past, painters often bought their sheet glass from merchants rather than making it themselves.
Step 2: Designing the window
Designers draw a full-size pattern, called a cartoon. The cartoon shows the shape of each piece, the color to use and where the lead or foil lines will run. In medieval times the design was drawn onto a table. Later, paper cartoons made it easy to save and reuse designs.
Step 3: Cutting and shaping
Each piece is traced onto the glass. The cutter scores a line once, the glass is snapped along the score with running pliers, and the edges are shaped with grozing pliers or a grinder. Good cutting depends on a clean score and steady pressure. Most beginners need practice to get consistent breaks. Is stained glass hard to learn? covers the skills that take the longest.
Step 4: Painting and firing (optional)
Fine lines and shading can be painted onto the glass. Glass paint is made from powdered glass, metal oxides and a liquid binder, and it is fired in a kiln so it fuses to the surface. Silver stain is applied to the back of the glass and fired to produce yellow to orange tones. Not every project uses paint.
Step 5: Assembling the panel
There are two common ways to join the pieces:
- Lead came. H-shaped lead strips are fitted around each piece. The joints are soldered, and the lines become part of the design. This method suits larger, traditional panels.
- Copper foil. Adhesive copper foil is wrapped around each edge, and the seams are soldered on both sides. Copper foil lets makers join small or intricate shapes, and it is the usual choice for suncatchers and three-dimensional pieces.
Both methods use solder, and both need flux to help the solder flow. Lead-related safety notes are in is stained glass safe.
Step 6: Cementing and finishing
Panels made with lead are usually filled with glazing cement or putty between the glass and the lead, which seals the panel and adds stiffness. Excess cement is cleaned off with whiting, a fine chalk powder. Solder lines can be treated with patina to change their color, and the finished piece is polished. Large windows are set into an iron frame, called an armature, that supports the weight.
Making stained glass at home
A typical home project follows the steps above in a simpler form:
- Choose a simple design and draw it full size.
- Buy sheets in the colors you need, and cut them with a glass cutter.
- Grind the edges so the pieces fit.
- Wrap the edges in copper foil, or fit them into lead came.
- Solder the joints, clean the piece and finish it.
For the tools and materials you will need, see how much it costs to start stained glass. The stained glass glossary defines the terms used in each step, and types of stained glass explains the sheet types you can choose from.